Author |
Message |
Bigmachinist
Minnow Username: Bigmachinist
Post Number: 8 Registered: 2-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 27, 2005 - 4:57 pm: |
|
I need some advice. My 25 hp evinrude won't start. I used it last back at thanksgiving. Before parking it I ran the gas out of the carb, and sprayed fogging oil in the cylinders. I have never had this much trouble out of it before. What should I check first. |
Will
Minnow Username: Will
Post Number: 9 Registered: 2-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 27, 2005 - 7:30 pm: |
|
spark plug. remove the spark plug, clean it clean out the inside, spray in some engine starter, crank er up. If it doesn't crank up after that then I recommend someone who knows a little more about engines than i do. Although that usually works for me. Meak sure your spark plug is still good too. Vegatarian: Indian Word for Bad Fisherman
|
Sturm1022
Bluegill Username: Sturm1022
Post Number: 194 Registered: 1-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 27, 2005 - 8:28 pm: |
|
iboats.com has a great forum for those type of questions my fat fingers cant spell I'll probably turn into a floating turd and Picou will break the knob off my post counter immediately. ATW 2/10/05
|
Picou
Hybrid Username: Picou
Post Number: 824 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 27, 2005 - 8:28 pm: |
|
Without hearing the motor it's hard to say where to start. Pull the plugs and lay them against the side of the motor and make sure you are getting a spark. If you are getting a spark, then I would suspect the gas. Make sure the pump ball is holding pressure. I have used a straw to put some fuel into the cylinder directly and try it. I was told that WD-40 makes a good "quick start" fuel and I was also told to stay away from lighter fluid or straight gas because there is no lubricant. If that is not working, you may have something clogging the jets and you will need to yank the carb and clean it. Give some more details on how it is acting and I will see what I can figure out. Definately check the plugs and put something in the cylinder thru the spark plug hole and try to fire it up. Let us know how it reacts. Thank you Lord for my family and the waters I get to fish
|
Bigmachinist
Minnow Username: Bigmachinist
Post Number: 9 Registered: 2-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 27, 2005 - 9:39 pm: |
|
Plugs are new, gas is new, getting plenty of fire. I cleaned the carb and it is getting fuel. I got it started after pulling on it for 30 minutes. I let it run in a barrel for till it warmed up. Killed it and it wouldn't start again. I broke the starter rope, so it will have to wait before I can work on it again. |
Charles
Moderator Username: Charles
Post Number: 257 Registered: 7-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 27, 2005 - 9:44 pm: |
|
Starter activater |
Bigun
Bluegill Username: Bigun
Post Number: 162 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, February 27, 2005 - 9:45 pm: |
|
Sounds like it is time for a Yamaha Could not pass it up, Just messing. Sounds like you know enough about it if you are tearing down carbs! Could be anything. Wish I could help more! |
Bigmachinist
Minnow Username: Bigmachinist
Post Number: 10 Registered: 2-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, February 28, 2005 - 8:16 pm: |
|
I wish I could afford a yamaha. I am going to take it to the dealer one day this week hopefully and see what is the matter. I wanted to figure it out myself, but have to work overtime for a couple of weeks and don't have the time to do it. |
Picou
Hybrid Username: Picou
Post Number: 841 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, February 28, 2005 - 9:41 pm: |
|
I have been thinking about it and trying to figure out what would make it a bear to start, then let it run fine once it started. I am stumped... What about hoses? Pump ball? Heck if I know... Where is Keith when we need him... Thank you Lord for my family and the waters I get to fish
|
Sturm1022
Bluegill Username: Sturm1022
Post Number: 210 Registered: 1-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, February 28, 2005 - 9:48 pm: |
|
you need a suzi they solve problems!!! my fat fingers cant spell I'll probably turn into a floating turd and Picou will break the knob off my post counter immediately. ATW 2/10/05
|
Bigun
Bluegill Username: Bigun
Post Number: 172 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, February 28, 2005 - 9:56 pm: |
|
Sturm, he already has a motor that won't run, what does he need another one for! PQ, I was kind of wondering about the bulb myself. Have had it happen before! |
Sturm1022
Bluegill Username: Sturm1022
Post Number: 212 Registered: 1-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, February 28, 2005 - 10:03 pm: |
|
she likes the suzuki motors!! wont fish with anything else!!
my fat fingers cant spell I'll probably turn into a floating turd and Picou will break the knob off my post counter immediately. ATW 2/10/05
|
Will
Minnow Username: Will
Post Number: 26 Registered: 2-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Thursday, March 3, 2005 - 10:25 pm: |
|
I got a suzuki and it runs great. I cranked her up for the 1st time tonight in two years. Didn't get to do any fishing last year. Alls it took was a charged battery. Vegatarian: Indian Word for Bad Fisherman
|
Keith
Minnow Username: Keith
Post Number: 34 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, March 6, 2005 - 8:09 pm: |
|
quote:Plugs are new, gas is new, getting plenty of fire. I cleaned the carb and it is getting fuel.
If it's getting fuel and plenty of fire, it should be running. My guess is one of them is not happening. Unless it's got a major problem like a broken reed valve, hole in the piston, stuck rings or other major mechanical problem, it should be running if your right about the above. Fire plus fuel will create an explosion. I'd like to know what you find out. |
Bigmachinist
Minnow Username: Bigmachinist
Post Number: 11 Registered: 2-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, March 6, 2005 - 9:24 pm: |
|
I figgered it out last night. I had some corrosion on the armature plate. This was causing it to ground out intermittenly. One minute it would be firing good, the next it wouldn't. The only way I noticed this was by working on it in the dark, and noticing sparks coming from under the flywheel. Cleaned everything and waterproofed the connections, now it starts every time. |
Keith
Minnow Username: Keith
Post Number: 37 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, March 6, 2005 - 10:05 pm: |
|
That's good news, I'm glad you got it it fixed. |
Texfisher
Bluegill Username: Texfisher
Post Number: 213 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, March 6, 2005 - 10:10 pm: |
|
That's a good fix. Those motor repairs can get expensive when it's something major. If you're richer than me I think we're related. If you're poorer than me I know we're related. My bass club webpage http://texbass.8m.com/
|
Atthewall
Bluegill Username: Atthewall
Post Number: 241 Registered: 11-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, March 6, 2005 - 10:29 pm: |
|
Outstanding and excellent trouble shooting. |
Sturm1022
Bluegill Username: Sturm1022
Post Number: 235 Registered: 1-2005
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, March 6, 2005 - 10:58 pm: |
|
she still wants to fish with a suzi!!!!!! jk good job!! my fat fingers cant spell I'll probably turn into a floating turd and Picou will break the knob off my post counter immediately. ATW 2/10/05
|
Bigun
Bluegill Username: Bigun
Post Number: 203 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Monday, March 7, 2005 - 7:17 am: |
|
I was going to tell you to try that... |
Picou
Hybrid Username: Picou
Post Number: 898 Registered: 8-2004
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, March 8, 2005 - 9:47 am: |
|
Great troubleshooting job... Sometimes stumbling on the answer is better than knowing what the problem is. That was a tough one for sure. Glad you got it running right. Thank you Lord for my family and the waters I get to fish
|